The smart lighting range built for Australian homes.
Swap your standard switch or dimmer for a PIXIE and get app control, voice control, scheduling, and whole-home scenes. No new wiring, no specialist installer required.
The Range
Smart Dimmer
Dim LED, halogen, and tungsten loads from your phone, by voice, or from the wall. Built-in soft start and adjustable fade rates for perfect scene control. HCL and RippleShield™ variants available.
Smart Switch
Smart switching for just about anything: lights, fans, exhaust fans, pool pumps, heated towel rails, and more. Full scheduling, timer run-on, and remote on/off from anywhere.
Smart Timer Switch
Purpose-built for time-based control: bathroom exhaust fans with run-on, garden lighting, outdoor flood lights, and energy-saving automation for any fixed load.
Multiway & Scene Switches
Control one circuit from multiple locations, no extra wiring needed. Set Welcome Home and Goodbye scenes from a single tap. Battery-powered options for wall positions where cabling is difficult.
Made to Fit Your Home
Your wall plates. Your style. Your choice.
PIXIE smart modules fit straight into most branded switch plates already available in Australia so there's no need to start over. A simple Click. Clack. Snap. modular approach means you can mix and match dimmers, switches, timers, and scene controllers in the same plate.
Configure anything from a single-gang to a 6-gang layout, in white, grey, or black. The look and feel stays exactly as you'd want it.
Dimming, the Way It Should Work
Tap on/off
A single tap brings lights on at their last-used level, no guessing, no surprises. Tap again to turn off.
Press to dim
Press and hold to ramp brightness up or down smoothly and precisely. Release to hold the level.
Double tap to max
Double tap goes straight to full brightness instantly, great for those times when you need all the light right now. Built-in 2-second soft start protects your dimmers and lights, with adjustable fade rates so scenes transition exactly as intended.
Light That Works With Your Body, Not Against It
Light that adjusts itself throughout the day.
Human-Centric Lighting or HCL, goes beyond dimming. It automatically colour-tunes your downlights throughout the day to match your body's natural rhythm. Cooler, brighter light in the morning helps you focus. Warmer, softer light in the evening signals to your body that it's time to wind down.
When using PIXIE Smart RippleShield™ dimmers, the PIXIE PLUS app, and SAL Coolum PLUS RS downlights, HCL mode automatically colour-tunes between 3000K and 6500K whenever the dimmers are activated no manual adjustments needed.
- Improves mood, focus, and sleep quality
- Circadian science, not just colour temperature control
- Automatic: activates whenever you use the dimmer
- Requires PIXIE RippleShield™ dimmer + SAL Coolum PLUS RS downlights
Flickering LEDs? Not on PIXIE's watch.
Flickering LED downlights are a common problem in NSW and south-east Queensland, where electricity authorities broadcast off-peak hot water ripple control tones that interfere with standard dimmers, even in homes without electric hot water.
PIXIE RippleShield™ dimmers (SDD400RSBTAM) are immune to these tones. Pair them with SAL Coolum PLUS RS downlights and you get completely flicker-free lighting, plus full HCL capability on top.
Every Dimming Protocol. One Ecosystem.
Different light fittings, especially those sourced internationally or specified by lighting designers, use different dimming protocols. PIXIE has a module for each one, so no matter what's been specified, you can bring it all under one app.
DALI2 Broadcast Dimmer
The international lighting control standard used by lighting designers and architects sourcing fittings globally. PIXIE's DALI2 controller is a certified DALI2 device: guaranteed performance, no guesswork.
0–10V Signal Dimmer
The go-to protocol for commercial LED drivers and architectural downlights. Reliable, widely used, and now fully controllable from the PIXIE app.
PWM LED Strip Dimmer
Colour-tunable and RGB LED strip dimming, perfect for feature lighting, cove lighting, and decorative applications. Full spectrum control from a single PIXIE controller.
Set It. Forget It. Let PIXIE Handle It.
Garden & outdoor lights
7-day, 24-hour schedules turn outdoor lights on at dusk and off at dawn, without any manual input.
Lived-in look
Lights turn on and off in natural patterns while you're away, deterring opportunists without any fuss.
Heated towel rails
Schedule heated towel rails for the morning routine and cut off automatically, comfort without waste.
Bathroom exhaust fan run-on
The timer switch keeps the fan running for a set period after you leave, properly vented every time.
Pool pump automation
Run pool pumps on a 24/7 schedule. No more manual timers, just reliable, set-and-forget operation.
Welcome Home & Goodbye scenes
One tap activates the perfect mood when you arrive. A double tap turns everything off as you leave.
Control From Anywhere in the Room
Full dimming. Multiple locations.
Install a PIXIE controller wherever you want one, hallway, bedside, entry. Every location has full dimming control over the same circuit. No extra wiring, no complicated switching loops.
One to many. Many to one.
One button or dial can control multiple ceiling fans and lights at once. Or install multiple Multifunction devices to control a single circuit, whatever configuration suits the room.
Battery-powered. No wires needed.
In situations where getting a cable in is difficult, or just not worth the cost a battery-powered remote control mech delivers full wireless control without any wall wiring at all.
Remove the limits of traditional switches.
Traditional multiway switching means expensive rewiring or chasing walls. PIXIE multiway is wireless, install a control point wherever it makes sense, long after the build is done.
You're in control.
The PIXIE PLUS app puts your lights, fans, blinds, and more in the palm of your hand. Create schedules, build scenes, manage household access, and control everything from anywhere, whether you're home or away.
Your home.
Your ecosystem.
PIXIE keeps smart homes simple to use, easy for electricians to set up, and able to work seamlessly with compatible systems from other brands. No need to be an I.T. expert.
Get your free PIXIE smart home design.
Upload your floor plans and our team will mark up exactly where each product goes, plus a complete bill of materials your electrician can quote from. Up to 3 revisions, a free 15-minute Zoom call included.
Start your free designSpecifications
| Load compatibility | LED, tungsten, and halogen loads (dimmers) | |
| Wall plate compatibility | Fits most branded switch plates available in Australia, mix and match 1-gang to 6-gang layouts | |
| Protection | Over-temperature, overload, and short circuit protection built in | |
| LED status indicator | Bright when on, faint when off, locatable in the dark. Enable or disable via the PIXIE app. | |
| Soft start | Built-in 2-second soft start protects dimmers and lights. Adjustable fade rates for custom scene transitions. | |
| Scheduling | 7-day, 24-hour schedules via the PIXIE app: set and forget for any switched load | |
| Control options | PIXIE app, Apple Home (Siri Shortcuts), Amazon Alexa, Google Home, Samsung SmartThings, IFTTT, physical wall control | |
| Connectivity | Bluetooth Mesh: self-healing network; no hub, no Wi-Fi dependency |
Licensed electrician installation required. PIXIE products must be installed by a licensed electrician. Need help finding one? Use our PIXIE Certified Installer finder.
Datasheets & Installation Guides
Increase the IQ of your smart home.
Extend your PIXIE system further with accessories that boost range, add integration with other systems, and give you more control options throughout your home, all within the same app.Connectivity & Range
PIXIE Portal — 120m Mesh Extender
Extends wireless control distance up to 120 metres in one direction, keeping distant devices in the same PIXIE network without internet involvement.
Bluetooth Mesh Signal Booster
Expands signal coverage of an established PIXIE network, extending control distances and improving stability in larger homes or challenging building materials.
Contact Sensor Transceiver
Monitor gates, doors, and windows, or connect smoke detectors. Push notifications to your phone on any status change. Ideal for smoke alarm monitoring from anywhere.
Wireless Control
Remote Control Button
Full multifunction control in a modern, compact form factor. Comes with magnets and 3M adhesive — stick it wherever control is needed, no wiring required.
Remote Control Mech
All the power of a PIXIE Multifunction controller in a battery-powered mech. Fits most Australian wall plates — perfect where running a cable is impractical or too costly.
Non-Smart Button & Momentary
10AX non-smart switches designed to fit the PIXIE Ambience wall plate range. Available as Press Mech or Momentary Press Mech — keeps a uniform look when mixing smart and non-smart devices on the same plate.
System Integration & Load Control
3rd Party Interfacing Module
Integrate PIXIE with legacy home automation systems — CBUS®, Dynalite®, KNX®, Control4®, security systems, and AV systems via dry-contact outputs. No internet required.
Larger Load Relay Controller
Controls high-load devices: pool pumps, outdoor heaters, and floodlights up to 6A per output (two outputs). Full scheduling and remote control with automatic power-restore memory.
Weatherproof IP66 Enclosure
Purpose-designed to house PIXIE Smart Powerpoints and modules in outdoor conditions. IP66 rated with flex and plug connection — ideal for pool equipment, outdoor lighting, and exposed locations.
DC Fan Control Modules
Hunter Pacific Ceiling Fan Module
Fit the PIXIE smart module (PIXIEMO98) into the ceiling fan receiver base to unlock 9-speed smart control for compatible Hunter Pacific DC V2 ceiling fans.
Ventair Skyfan DC FanLink
The Ventair Skyfan DC FanLink module (FLINKPIX) is recognised by PIXIE as a PIXIE Master device. Install. Scan. Control. — full scheduling, group control, and scenes immediately.
Big Ass Fan Module
PIXIE works with Big Ass Fans via the Big Ass fan 0–10V module (model 006352) paired with PIXIE 0–10V Controllers — enabling both fan speed and light control where the fan supports it.