Your blinds, curtains and awnings. Smart, simple, automatic.
PIXIE gives you complete control over motorised roller blinds, curtains, outdoor awnings, skylights and more, from your phone, your watch, your voice, or a dial on the wall. Schedules, scenes, and full smart home integration, with no Wi-Fi needed.
First, let's make sure it works with your blinds. PIXIE is compatible with most major International motor brands, check yours below.
PIXIE works with the leading Australian blind and curtain motor brands.
If your blinds have a motor with a dry contact / key-switch interface or 3/4-wire connection, chances are PIXIE can control it. Speak to your electrician or contact us to confirm compatibility.
Don't see your brand? Contact us. PIXIE is compatible with many additional motor manufacturers.
PIXIE doesn't just open and close. Here's everything you can do once it's installed.
Smart blind control, your way.
Open, Stop, Close
Full control from anywhere: open fully, close fully, or stop at any position. Works from the app, a wall button, your voice, or a schedule.
Partially Open
Set a favourite position once, then recall it with a single button press, voice command, or scene. Great for managing light and privacy at the same time.
Schedules
Set your blinds to open with the sun and close at dusk, automatically, every day, without touching anything.
Voice Control
Control every blind, curtain and awning by voice using Google Home, Amazon Alexa or Siri. Control one room or every room at once.
Nudge
Open or close your blinds just a little more with a Nudge command. Set the nudge amount in the app, then recall it by voice whenever you need it.
Single Command, Multiple Rooms
One PIXIE scene can open or close every blind in your home simultaneously, combine with lights and fans for true single-command room-setting.
Multiway Wall Control
Control from the door, from both sides of the bed, or from anywhere, even with no cabling at that spot. PIXIE's wireless multifunction controllers make any location possible.
Motor Protect
Built-in interlock prevents motors from being driven in both directions simultaneously. Your motors are always safe: it's built into the controller hardware.
No Wi-Fi or Internet Needed
PIXIE Bluetooth mesh ensures you are always in control at home, no matter the state of your network or internet.
Use Your Existing Remote Too
PIXIE and your existing motor remotes coexist without conflict. You don't lose what you already have, you just gain a lot more.
Decide Who Has Control
Define who controls what and when, whether at home only or with remote access. Changes apply instantly.
Security History Log
A 7-day log captures every open and close: who, what, and when. Complete visibility over every blind, curtain, awning and window in your home.
And it's not just roller blinds. PIXIE controls the full range of motorised shading in your home.
It's not just blinds. PIXIE controls all of this.
Any motorised shading or window product with a motor interface can typically be added to your PIXIE smart home. Your electrician specifies the right controller, your experience stays the same across every device.
Roller Blinds
Open / stop / close, partial positions, nudge, schedules
Curtains
Full motorised curtain control, sheer and blockout
Outdoor Awnings
Retract and extend, scheduled and on-demand
Skylights
Open and close skylights automatically based on weather or time of day
Winding Windows
Automate louvre and winding window control alongside the rest of your home
Louvred Windows
Control airflow and natural ventilation from the app, voice, or wall
Schedules that just work.
Set your blinds to open with the sun every morning and close at dusk. Create different schedules for different seasons or different days of the week. Once it's set, you never think about it again.
A smarter way to control your blinds.
The PIXIE Multifunction Rotary Controller paired with the PIXIE Blind Controller gives you the most intuitive on-wall blind control available. One dial does everything:
- Rotate counterclockwise to open (or extend)
- Rotate clockwise to close (or retract)
- Press once to stop at any position
- Press twice for a favourite preset position
The direction preference is set by the homeowner during setup, not fixed by the hardware, so it always works the way that feels natural. One dial. Zero confusion.
One dial at the door. One on each side of the bed.
Because PIXIE's Multifunction Controller is wireless and requires no cabling at the control point, you can install a dial exactly where it makes sense, not just where the cabling runs.
At the bedroom door
A single dial controls all bedroom blinds together, perfect for entering or leaving the room
Left side of the bed
A dial controls that side's blind only, independent control without disturbing anyone
Right side of the bed
A separate dial for independent control, no arguing about the blinds, no getting out of bed
These are just three examples. PIXIE's wireless approach means you can add a control point anywhere, hallway, kitchen, study, living room, with no rewiring required.
Ready to go deeper? Here are the full specifications for both the Blind Controller and the Rotary Controller.
The full technical detail.
Not sure what's right for your home? That's exactly what the free design service is for.
Not sure what blind and curtain control is right for your home? We'll work it out together.
Send us your floor plan and we'll put together a complete smart home design, including which controllers, how many, and where everything goes. No cost, no obligation.
Submit your plans. It's free.No obligation. Completed by PIXIE's in-house design team.
Increase the IQ of your smart home.
Extend your PIXIE system further with accessories that boost range, add integration with other systems, and give you more control options throughout your home, all within the same app.Connectivity & Range
PIXIE Portal — 120m Mesh Extender
Extends wireless control distance up to 120 metres in one direction, keeping distant devices in the same PIXIE network without internet involvement.
Bluetooth Mesh Signal Booster
Expands signal coverage of an established PIXIE network, extending control distances and improving stability in larger homes or challenging building materials.
Contact Sensor Transceiver
Monitor gates, doors, and windows, or connect smoke detectors. Push notifications to your phone on any status change. Ideal for smoke alarm monitoring from anywhere.
Wireless Control
Remote Control Button
Full multifunction control in a modern, compact form factor. Comes with magnets and 3M adhesive — stick it wherever control is needed, no wiring required.
Remote Control Mech
All the power of a PIXIE Multifunction controller in a battery-powered mech. Fits most Australian wall plates — perfect where running a cable is impractical or too costly.
Non-Smart Button & Momentary
10AX non-smart switches designed to fit the PIXIE Ambience wall plate range. Available as Press Mech or Momentary Press Mech — keeps a uniform look when mixing smart and non-smart devices on the same plate.
System Integration & Load Control
3rd Party Interfacing Module
Integrate PIXIE with legacy home automation systems — CBUS®, Dynalite®, KNX®, Control4®, security systems, and AV systems via dry-contact outputs. No internet required.
Larger Load Relay Controller
Controls high-load devices: pool pumps, outdoor heaters, and floodlights up to 6A per output (two outputs). Full scheduling and remote control with automatic power-restore memory.
Weatherproof IP66 Enclosure
Purpose-designed to house PIXIE Smart Powerpoints and modules in outdoor conditions. IP66 rated with flex and plug connection — ideal for pool equipment, outdoor lighting, and exposed locations.
DC Fan Control Modules
Hunter Pacific Ceiling Fan Module
Fit the PIXIE smart module (PIXIEMO98) into the ceiling fan receiver base to unlock 9-speed smart control for compatible Hunter Pacific DC V2 ceiling fans.
Ventair Skyfan DC FanLink
The Ventair Skyfan DC FanLink module (FLINKPIX) is recognised by PIXIE as a PIXIE Master device. Install. Scan. Control. — full scheduling, group control, and scenes immediately.
Big Ass Fan Module
PIXIE works with Big Ass Fans via the Big Ass fan 0–10V module (model 006352) paired with PIXIE 0–10V Controllers — enabling both fan speed and light control where the fan supports it.